_2013_03_04_Plumbing for backyard raised beds

IMG_5751.JPG: Two lines for garden watering. The 3/4" line is on a timer valve for the drip irrigation and the 1/2" line is for flowing water at the old beds and at the new beds

IMG_5752.JPG: The constant flowing water is tapped off the input to the timer valve. The other pipe (currently plugged) is for another sprinkler head controlled by the valve at the far end of this ditch.

IMG_5753.JPG: The valve feeds a 1" line that is split with a T to serve the old raised beds and the new raised beds for their drip systems

IMG_5754.JPG: This is the run to the new raised beds

IMG_5755.JPG:

IMG_5756.JPG: The line is Tee'd with a line going to a raised bed (yet to be framed) and over to the fence so that a drip line can be installed for plants along the fence line.

IMG_5757.JPG: This is the T for the line over to the fence

IMG_5758.JPG: This is the drip line and the constant pressure line at the NE corner of the NW raised bed

IMG_5759.JPG: